Heavy Duty Brush Sanding Machine

THREE GROUPS OF SANDING UNITS CAN SAND PANELS WITH CURVED SURFACES IN DIFFERENT DIRECTIONS AND DIFFERENT HEIGHT, THAT CAN ACHIEVE THE BEST SANDING EFFECT
EACH SANDING UNIT HAS 2 ROWS, WHICH CAN ROTATE IN TWO DIFFERENT DIRECTIONS
HORIZONTAL ROLLER IS USED TO SANDING HORIZONTAL GROOVES IN PANELS, SANDING DISK IS USED TO SANDING PANELS SURFACE AND SHARP EDGES AND CORNERS
2 SANDING ROLLERS, USED TO SANDING PANELS SURFACE AND VERTICAL GROOVES
EACH SANDING SHAFT CAN SWING SEPARATELY, IT IS USED TO SANDING THE SANDING MARKS CAUSED IN WORK. IT CAN MAKE PANEL SURFACE MORE SMOOTH AND CLEAN
SANDING UNIT CAN BE PULLED OUT AS A WHOLE PART FROM 2 SIDES OF THE MACHINE, IT IS CONVENIENT TO CHANGE SANDING PAPER

Model	HM1000R6H	HM1300R6H
Working width	20-1000mm	20-1300mm
Working thickness	2-110mm	2-110mm
Working length	≥400mm	≥400mm
Feed speed	2.5-12.5m/min	2.5-12.5m/min
Number of polishing roller	8 lateral +10 disc+ 2 roller	10 lateral +12 disc+ 2 roller
Total motor power	12.85kw	18.75kw
Swing scope	50/30/15mm	50/30/15mm
Speed of sucked air	≥25m/s	≥25m/s
Working air pressure	≥0.5Mpa	≥0.5Mpa
Sanding belt	180/240/320 mesh(paper tape) for MDF, 320/400/600 mesh(cloth tape) for lacquer	180/240/320 mesh(paper tape) for MDF, 320/400/600 mesh(cloth tape) for lacquer
Overall dimensions	360019501800mm	360022501800mm